manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 116

Maintenance – lubrication

 

 

116 

 

Pos: 42.32.1 /Überschriften/Überschriften 1/U-Z/Wartung - Schmierung @ 24\mod_1241675457008_78.docx @ 247325 @ 1 @ 1 

 

13 

Maintenance – lubrication  

Pos: 42.32.2 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der grundlegenden Sicherheitshinweise alte Form @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 42.32.3 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der Sicherheitsroutinen alte Form @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

Pos: 42.32.4 /BA/Sicherheit/8. Voraussetzungen/Handlungsanweisung für alle Maschinen/Handlungsanweisung: Maschine stillsetzen und sichern @ 274\mod_1404365253849_78.docx @ 2065151 @  @ 1 

 

• 

Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting 
down and safeguarding the machine". 

Pos: 42.32.5 /Überschriften/Überschriften 2/P-T/SSchmierstellen an den Gelenkwellen @ 134\mod_1350390637703_78.docx @ 1183930 @ 2 @ 1 

 

13.1 

Lubrication Points on the Universal Shafts  

Pos: 42.32.6 /BA/Wartung/Gelenkwelle schmieren/Abschmieren Gelenkwelle Schwader TC 880-1000, TS 620-740 @ 487\mod_1481538025744_78.docx @ 3277507 @  @ 1 

 

 

SW9000040

Fig. 67 

Rotary drive PTO shafts 

 

Drive PTO shaft 

• 

Lubricate the PTO shafts at the intervals indicated in the figure with multi-purpose grease. 
Follow the operating instructions of the PTO shaft manufacturer. 

 

Pos: 42.32.7 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды