manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 92

Settings

 

 

92 

 

Pos: 40.6.1 /Überschriften/Überschriften 2/K-O/KKreiselneigung einstellen @ 191\mod_1381819931154_78.docx @ 1631074 @ 2 @ 1 

 

11.1 

Setting the Rotor Inclination  

Pos: 40.6.2 /BA/Sicherheit/6. Überarbeitete Warnhinweise/Warnung- Einstellarbeiten Maschinen @ 297\mod_1412757509120_78.docx @ 2333197 @  @ 1 

 

 

WARNING!

 

 

When performing repair, maintenance or cleaning work on the machine, or in case of 
technical intervention, drive elements may start moving.

 

Thus there is a risk of serious 

injuries or death. 

• 

Switch off tractor engine, remove the ignition key and carry it with you. 

• 

Secure the tractor against accidental start-up and against rolling. 

• 

Wait until all machine parts have come to a complete stop and have been cooled down 
completely. 

 

Pos: 40.6.3 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselneigung einstellen Text Einleitung Swadro TC 680_TC 760 @ 223\mod_1392114706229_78.docx @ 1808993 @  @ 1 

 

The rotor pitch angle has been set at a transverse angle to the chassis in the factory. If the 
crops are not picked up properly, the working quality can be improved by adjusting the rotor 
pitch. 
The rotor pitch angle is adjusted for each rotor via the guide wheels at the chassis. The best 
results are achieved if the rotor pitch adjustment ensures the tines are closer to the ground level 
when outputting the crops than at the start when picking up the crops. 

 

Pos: 40.6.4.1 /Überschriften/Überschriften 3/K-O/KKreiselfahrwerk (Serie) @ 223\mod_1392126168498_78.docx @ 1810305 @ 3 @ 1 

 

11.1.1 

Rotor chassis (serial) 

Pos: 40.6.4.2 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselfahrwerk Bild Swadro TC 680_TC 760_TS 620_ TS 680 @ 247\mod_1396424074075_78.docx @ 1925403 @  @ 1 

 

SW700077_2

I

II

+

1

 

Fig. 53 

Pos: 40.6.4.3 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @  @ 1 

 

 

Pos: 40.6.4.4 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselfahrwerk Längsneigung_Kreiselfahrwerk (Serie) und Tandemfahrwerk_Mittel- und Seitenschwader  @ 247\mod_1396420813830_78.docx @ 1925162 @  @ 1 

 

Longitudinal inclination: 

A change of longitudinal inclination (rotor tilts to the front) is reached if the rear guide wheels 
(right and left) of the chassis are reconnected in one of the seven bore holes in the hole pattern. 

Pos: 40.6.4.5 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @  @ 1 

 

 

Pos: 40.6.4.6 /BA/Einstellungen/Schwader/KreiselfahrwerkKreiselneigung einstellen Text Position_äußeres Tandemfahrwerk @ 466\mod_1467970075772_78.docx @ 3140777 @  @ 1 

 

Pos. I   = reduce rotor inclination 
Pos. II  = increase rotor inclination 
 

Pos: 40.6.4.7 /BA/Einstellungen/Schwader/KreiselfahrwerkKreiselfahrwerk Vorgehensweise Swadro diverse TC und TS @ 427\mod_1455032842030_78.docx @ 2959284 @  @ 1 

 

Do not step under the raised rotors. 

• 

Only raise the outrigger arms as far as necessary to perform the changeover work. 

• 

To set rotor inclination, dismount the rear guide wheels and move them in the hole pattern. 
For better orientation, observe the basic setting of rotor inclination, refer to chapter Initial 
Operation, “Rotor Inclination - Basic Setting”. 

Pos: 40.6.4.8 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды