manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 110

Maintenance

 

 

110 

 

Pos: 42.22.1 /Überschriften/Überschriften 2/P-T/RReifen @ 0\mod_1197357995667_78.docx @ 18075 @ 2 @ 1 

 

12.6 Tyres 

 

Pos: 42.22.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Warnung - Falsche Reifenmontage @ 0\mod_1197358162433_78.docx @ 18132 @  @ 1 

 

 

Warning! - Tyre fitting incorrect 

Effect: Injuries or damage to the machine 
• 

Fitting tyres requires sufficient knowledge and the availability of proper tools! 

• 

If tyres are not correctly fitted, it could explode when pumped up. This can cause serious 
injury. If you do not have sufficient experience of fitting tyres, have tyres fitted by the 
KRONE dealer or a qualified tyre specialist. 

• 

When fitting tyres on the wheel rims, the maximum pressure given by the tyre manufacturer 
must not be exceeded. The tyre or even the wheel rim could explode and/or burst. 

• 

If the tyre heels do not fit properly when the maximum permitted pressure is reached, let 
out the air, align tyres, lubricate the tyre heels and pump up the tyre again. 

• 

Detailed information about how to fit tyres onto agricultural machinery can be obtained from 
the tyre manufacturers. 

 

Pos: 42.22.3 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды