manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 70

Driving and Transport

 

 

70 

 

Pos: 36.7 /Überschriften/Überschriften 2/U-Z/VVorbereitungen zur Straßenfahrt @ 25\mod_1244092605963_78.docx @ 254666 @ 2 @ 1 

 

9.1 

Preparations for road travel  

Pos: 36.8 /BA/Fahren und Transport/Schwader/Prüfen Sie vor der Straßenfahrt, dass Swadro TS 620 (Twin)_TS 680 (Twin)_TS 740 (Twin) @ 246\mod_1396352991947_78.docx @ 1923013 @  @ 1 

 

SW9070059

2

1

 

Fig. 33  

Before road travel, make certain that  

• 

the machine is fully and correctly hitched. 

• 

the PTO shaft is switched off and the rotors have come to a standstill. 

• 

the rotors are locked (right and left sides of the machine). 

• 

the control unit is switched off, in case of electrically adjustable rotor height. 

• 

the machine is in the transport position. 

• 

the front swath cloth is swivelled up, in case of swath cloth front design (refer to chapter 
Operation “Swivelling up Front Swath Cloth”) 

• 

all hydraulic control units are located in neutral position. 

• 

the retaining bolts are correctly engaged in the lockings (1) (right and left rotor). 

• 

the tine guards (2) are on the tines which are located below 2 m in transport position (right 
and left rotor). 

• 

the lighting system functions properly. 

• 

the lower links are set to a height of 55 cm to the ground to observe the transport height. 

Pos: 36.9 /BA/Fahren und Transport/Schwader/Prüfen Sie vor der Straßenfahrt, dass  Zusatz Ausführung Twin @ 245\mod_1395842343303_78.docx @ 1912622 @  @ 1 

 

for Twin design 

• 

the rotors are completely retracted in the transport position so that the transport height can 
be met. 

Pos: 36.10 /BA/Fahren und Transport/Schwader/Hinweis Schutzbügel und klappbare Zinkenarme in Transportstellung reduziert Transporthöhe @ 156\mod_1363935125114_78.docx @ 1379336 @  @ 1 

 

 

Note 

With folding tine arms design 
The transport height may be reduced additionally if the folding tine arms and the hoop guards 
are put into transport position on both machine sides. 

 

Pos: 36.11 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды