manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 30

Safety

 

 

30 

 

Pos: 18.40 /BA/Sicherheit/6. Überarbeitete Warnhinweise/Hinweis - Nachbestellung/ Anbringung Aufkleber @ 357\mod_1438760742670_78.docx @ 2656419 @ 33 @ 1 

 

3.5.2 

Re-Ordering Safety Labels and Information Labels  

 

 

Note 

Each safety and information label is provided with an order number and can be ordered directly 
from the manufacturer or from authorised dealer (refer to chapter “Contact Person”). 

 

3.5.3 

Attaching Safety Labels and Information Labels  

 

 

Note - Attaching a label 

Effect: Adhesion of label 
• 

The attachment area must be clean, dry and free from dirt, oil and grease. 

 

Pos: 18.41 /Überschriften/Überschriften 3/A-E/A/Ansprechpartner @ 0\mod_1195569394286_78.docx @ 839 @ 3 @ 1 

 

3.5.4 Contact 

 

Pos: 18.42 /BA/AdressenAdresse Maschinenfabrik KRONE Spelle @ 489\mod_1484905432391_78.docx @ 3290621 @  @ 1 

 

Maschinenfabrik Bernard Krone GmbH & Co. KG 
Heinrich-Krone-Strasse 10 
D-48480 Spelle (Germany) 
 
Telephone: + 49 (0) 59 77/935-0 (Head Office) 
Fax.: + 49 (0) 59 77/935-339 (Head Office) 
Fax.: + 49 (0) 59 77/935-239 (Spare parts - domestic) 
Fax.: + 49 (0) 59 77/935-359 (Spare parts - export) 
 

Pos: 18.43 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды