manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 66

Start-up

 

 

66 

 

Pos: 34.48 /Überschriften/Überschriften 2/A-E/BBedienung anschließen @ 302\mod_1414049404753_78.docx @ 2355806 @ 2 @ 1 

 

8.7 

Connecting the Operation  

Pos: 34.49 /BA/Inbetriebnahme/Schwader/Anschluss elektrische Bedienung/Anschluss elektrische Bedienung Swadro TS 620 (Twin)_TS 680 (Twin)_TS 740 (Twin) @ 375\mod_1442817070635_78.docx @ 2726625 @  @ 1 

 

SW9070056_3

3

4

2

1

Fig. 30 
The connection for electrical operation is made via power supply cable (2). 
 

 

Note 

If necessary, the socket for power supply and the support for control unit must be mounted on 
the tractor beforehand. 

 
To do this: 
• 

Connect power supply cable (2) with socket for power supply (1) on the tractor and with 
socket (4) on the machine. 

• 

Insert the plug of the control unit into the appropriate socket (3) of the machine. 

• 

Lay the cable so that it does not touch the wheels. 

 

Pos: 34.50 /BA/Inbetriebnahme/Schwader/Hinweis Sauberkeit der Stecker und Steckdosen @ 2\mod_1202399563131_78.docx @ 59273 @  @ 1 

 

 

Note 

Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and 
moisture may result in short circuits!  

 

Pos: 34.51 /Überschriften/Überschriften 2/A-E/BBedienseil verlegen @ 156\mod_1363881269205_78.docx @ 1379224 @ 2 @ 1 

 

8.8 

Laying the Operating Cable  

Pos: 34.52 /BA/Inbetriebnahme/Schwader/Bedienseil verlegen @ 156\mod_1363881591787_78.docx @ 1379252 @  @ 1 

 

• 

Lay the loose end of the operating cable into the tractor cab. 

 

 

Note 

Lay the operating cable so that no movements are unintentionally triggered in any transport or 
working position. The operating cable must not come into contact with the tractor tyres. 

 

 

Pos: 34.53 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды