Krone LOAD CARRIER Скачать руководство пользователя

Страница: 29 / 128

RUNNING GEAR OPERATION

Operating instructions • Load Carrier • 505410638-02 • 07/2019

► Tighten the lock nut.

The height of the draw fork is set.

Adjusting the length of the draw fork us-
ing a tool

WARNING

accident hazard due to an unsecured
length adjustment at the draw fork!

An unsecured length adjustment at the
draw fork can cause accidents.

► Ensure that the threaded bolt is prop-

erly secured after adjusting the length
or changing the tractor unit.

Length adjustment, or a change of tractor
unit, can cause the overall length of the
train to be exceeded. Check the following
points every time you adjust the length or
during every vehicle change:

○

Ensure that the threaded bolts are
properly secured with the securing
devices,

○

Check the legally permitted overall
length of the train and

○

the distance between trailer and tractor
unit.

Fig. 5-9:

Length adjustment with tool

Threaded bolt (head)

Nut with threaded bolt

Retainer plate

► Unhitch the trailer

(see "7.2 Hitching and

unhitching the trailer", pg. 88)

► Loosen the nuts with a spanner and

unscrew them from the threaded bolts.

► Remove the threaded bolts.

► Place the draw bar in the desired posi-

tion by shifting it in or out.

► Reinsert the threaded bolts.

► Screw the nuts on the thread and

tighten at approx. 300 Nm. The draw-
bar tube should not have any play in
the clamp bearing.

► Secure the nuts using the retainer

plates.

The length of the draw fork is set.

Adjusting the length of the draw fork us-
ing rapid resetting

Fig. 5-10:

Length adjustment via rapid reset-
ting

Clamping bracket

Control lever

Crown nut

► Unhitch the trailer

(see "7.2 Hitching and

unhitching the trailer", pg. 88)

► Pull the control lever from the clamping

bracket.

► Insert the control lever into the crown

nut's groove and release it by turning
counterclockwise.

► Use the control lever to unscrew the

crown nuts from the threaded bolt to-
gether.

► Remove the threaded bolts.

Содержание LOAD CARRIER

































































































































Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды

Krone LOAD CARRIER, Руководство по эксплуатации

Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды