Krone LOAD CARRIER Скачать руководство пользователя | Manualshive

Страница: 14 / 128

background image

SAFETY

14

Operating instructions • Load Carrier • 505410638-02 • 07/2019

Component

Function

Side collision protec-
tion

Prevents cyclists and
pedestrians from
passing under the
trailer in case of acci-
dent

Underrun protection

Prevents under-run-
ning in case of rear-
end collisions

Indicators and control
displays

Serve to monitor and
make settings for the
trailer; optional sys-
tems differ according
to the manufacturer

2.9

General safety instructions

The basic safety instructions include all
safety measures sorted according to the
theme, and must always be observed.

Pneumatic dangers

There is a risk of injury due to pressure in
the pneumatic system.

► Do not open any components of the

pneumatic system if there is pressure
in the lines.

► Check the hose connections of the

pneumatic system regularly.

► When aerating and venting the sys-

tem, pay attention to unforeseeable
movement of pneumatic actuators.

► Fully depressurise the pneumatic sys-

tem before beginning maintenance
work.

Superstructure stability

The stability of the superstructure is ob-
tained by a variety of constructive meas-
ures and components.

► Do not make any changes to the deliv-

ery condition of the superstructure.

► Use the intended tensioning devices.

► Observe the instructions from the load

security certificates concerning the
components used.

Dangers while driving

There is a risk of impact on bridges, in tun-
nels or with other structures. Persons can
be injured or the vehicle, the transported
goods, and the structure can be severely
damaged.

► Observe the vehicle dimensions incl.

the transported goods.

► Observe the permissible passage di-

mensions (height, width).

Dangers when manoeuvring, coupling
and uncoupling

When manoeuvring or hitching and un-
hitching, there is a lethal risk of crushing
for persons standing between the tractor
unit and trailer as well as in the coupling
area.

► Only drive in reverse when nobody is

endangered.

► Only manoeuvre with a guiding assist-

ant.

► Before uncoupling, secure the trailer

additionally with wheel chocks against
accidental movement.

► Instruct all persons to leave the area

between the tractor unit and the trailer
during the coupling procedure.

Dangers when parking and unhitching

Accidental trailer movements, unstable
ground and poor securing at night can
cause serious accidents and injuries.

► Actuate the parking brake when un-

hitching.

► Also use wheel chocks on the wheels.

► When parking the trailer in a public

traffic area during the hours of dark-
ness, the vehicle should be particularly
marked in accordance with the legal
requirements.

Load distribution

Incorrect load distribution as well as im-
properly secured loads can lead to danger-
ous road handling and serious accidents or
damage to the vehicle.

«
...
12
13
14
15
16
...
»

Содержание LOAD CARRIER

































































































































Отзывы:

Нет отзывов

Похожие инструкции для LOAD CARRIER

Бренд: Yamaha Страницы: 54

Giga-Trailer 1840

Бренд: Strautmann Страницы: 39

Бренд: Iron Baltic Страницы: 24

Бренд: Norsjö Страницы: 32

Бренд: Meec tools Страницы: 35

Бренд: TrailMaster Страницы: 7

Бренд: TrailMaster Страницы: 22

Бренд: Humbaur Страницы: 230

RANGER Diesel 2013

Бренд: Polaris Страницы: 97

Бренд: Polaris Страницы: 141

Бренд: E-TON Страницы: 35

Бренд: Yamaha Страницы: 38

Бренд: Yamaha Страницы: 172

Бренд: Yamaha Страницы: 110

YFM350X Warrior

Бренд: Yamaha Страницы: 318

Бренд: Portafill Страницы: 92

Бренд: ADLY MOTO Страницы: 29

Бренд: ADLY MOTO Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды