Krone LOAD CARRIER Скачать руководство пользователя | Manualshive

Страница: 115 / 128

background image

MAINTENANCE AND REPAIR

Operating instructions • Load Carrier • 505410638-02 • 07/2019

115

► Observe other technical information

from the axle manufacturer regarding
the topic of "Conditioning".

Obtaining the reference braking values

The reference braking values are used as
the default for the legal brake tests. The
reference braking values for every current
trailer can be obtained on the KRONE
website

(see "12.2 Customer service and sup-

port", pg. 120)

10.2.7

Lubricating the trailer

NOTE

Material damage caused by dry lubrica-
tion points!

Too little or a lack of grease can result in
damage to moving parts.

► Lubricate the trailer regularly.

► Top up the grease on all the lubrication

points.

► Lubricate moving parts on the trailer

superstructure (e.g. door locks,
hinges) as needed.

► Lubricate the grease nipple on the

turnframe every 8,000 – 10,000 km.

► Also observe the enclosed supplier

documentation.

10.2.8

Electrical equipment

► Perform a visual check of the electrical

connections for the lighting and ABS/
EBS for wear and damage.

► Perform a visual check of the lighting

and signalling systems.

► Have defective electrical components

replaced by an authorised specialist
workshop.

► Only have work on the electrical equip-

ment performed by trained electricians,
or by personnel trained especially for
the purpose, in accordance with all ap-
plicable safety rules and regulations.

10.2.9

Contour marking

► Perform a regular visual check of the

contour markings.

► Pay attention to damage, soiling and

visibility.

► Have defective or damaged contour

markings replaced.

10.2.10 Bolted connections

► Check bolted connections regularly for

settling signs.

► Replace defective bolted connections.

► Observe the instructions about bolted

connections in the supplier document-
ation.

10.2.11 Load securing

► Perform a visual inspection for wear

and damage.

► Have defective or damaged compon-

ents replaced.

10.2.12 Coupling ring

!

WARNING

Risk of accident caused by wear!

A worn coupling ring can cause the trailer
to tear off while driving and result in seri-
ous injuries and material damage.

► Check the wear on the coupling ring

regularly.

► Worn coupling rings must be replaced

by an authorised specialist workshop.

► Check the coupling ring for wear and

damage.

INFO

Observe the maintenance instructions, di-
mensions and values of the coupling ring
manufacturer. Worn coupling rings must
be checked and replaced by an authorised
specialist workshop.

► Check the mounting and tighten the

fastening bolts if required.

► Lubricate the coupling ring as needed.

«
...
113
114
115
116
117
...
»

Содержание LOAD CARRIER

































































































































Отзывы:

Нет отзывов

Похожие инструкции для LOAD CARRIER

Бренд: MANCO Страницы: 57

Бренд: MANCO Страницы: 57

Бренд: IDEAL INDUSTRIES Страницы: 18

Бренд: Ezgo Страницы: 64

2005-2008 RX500 FA

Бренд: Honda Страницы: 540

Бренд: Landoll Страницы: 76

LEXION 770 2016

Бренд: Claas Страницы: 48

Бренд: WABASH COMMUNICATIONS Страницы: 47

Бренд: Komatsu Страницы: 435

Бренд: Kazuma Страницы: 25

Бренд: Erde Страницы: 4

Бренд: PRONAR Страницы: 101

Бренд: E-Z-GO Страницы: 135

Бренд: Landoll Страницы: 80

Бренд: Landoll Страницы: 70

Бренд: Taylor-Dunn Страницы: 150

Sasquatch 1000W

Бренд: Daymak Страницы: 24

GRIZZLY YFM70GPAN

Бренд: Yamaha Страницы: 180

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды