Krone LOAD CARRIER Скачать руководство пользователя

Страница: 44 / 128

RUNNING GEAR OPERATION

Operating instructions • Load Carrier • 505410638-02 • 07/2019

► Operate the control switch time-de-

pendently (rotary push-button switch
with reset).

The lift axle is raised in compliance
with legal regulations when the button
is actuated for less than 5 seconds
(starting aid).

When operated for longer than 5
seconds, the lift axle automatic system
is deactivated and the lift axle remains
down regardless of the load state
(force lowered). This position is kept
as long as the ignition of the tractor is
not interrupted.

Fig. 5-30:

Control switch functions of the lift
axle control system

5.12

Rigid axle

KRONE trailers are equipped with rigid
axles.

Also observe the enclosed supplier

documentation.

5.13

Step-on devices

CAUTION

Risk of injury from falls!

Using unsuitable items to climb onto or off
the vehicle or jumping from the load com-
partment can result in falls with injuries.

► Only use the built-in step-on devices.

► Do not jump down from the load com-

partment.

KRONE trailers can be equipped with the
following climbing aids:

○

Hand strap

(see "5.13.1 Hand strap",

pg. 44)

○

Aluminium ladder

(see "5.13.2 Aluminium

ladder", pg. 44)

○

Folding telescoping ladder

(see "5.13.3

Folding telescopic ladder", pg. 45)

○

Fold-down steps (at rear wall, folding)

(see "5.13.4 Fold-down steps", pg. 46)

5.13.1

Hand strap

For safe mounting and dismounting, a
hand strap is installed on the inside of the
corner post.

► Use hand straps for safe mounting and

dismounting.

► For mounting and dismounting, always

face the ladder so that the hand straps
can be used without problems.

5.13.2

Aluminium ladder

WARNING

Risk of accident caused by an unse-
cured ladder!

An unsecured ladder can drop onto the
road while driving and cause an accident.

► Prior to departure, check that the lad-

der is properly secured.

To facilitate climbing into the trailer, an alu-
minium ladder is located under the chassis.

Содержание LOAD CARRIER

































































































































Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды

Krone LOAD CARRIER, Руководство по эксплуатации

Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды