Krone LOAD CARRIER Скачать руководство пользователя | Manualshive

Страница: 106 / 128

background image

TROUBLESHOOTING IN THE EVENT OF FAULTS

106

Operating instructions • Load Carrier • 505410638-02 • 07/2019

Fault

Cause

Solution

Braking abnor-
malities (trailer
and tractor
brake abnor-
mally in the
vehicle combin-
ation)

Failure to perform
the brake power/
train tuning

► Perform a brake power/train tuning with the alloc-

ated tractor unit

(see "9.2 Fixing braking abnormalit-

ies", pg. 106)

► In addition to the operating instructions for the

KRONE Trailer Axle, also observe the operating
instructions for the tractor unit and the trailer.

ABS/EBS error
display

Fault in the control-
ler

► Contact an authorised specialist workshop or cus-

tomer service.

Rear lights, dir-
ection indicat-
ors, position
lamps or similar
do not work

Defective bulbs

► Replace the defective bulbs.

► Check that the supply and control connections

between the tractor and trailer are properly con-
nected.

The lift axle no
longer functions

○

Faults on the
lift axle con-
trol due to de-
fective lift
axle valves

○

Fault due to
incorrect con-
trols from the
tractor unit

► Check that the supply and control connections

between the tractor unit and trailers are properly
connected.

► Contact an authorised specialist workshop or cus-

tomer service.

9.1

Checking the lift axle con-
trol

!

WARNING

Risk of accident caused by faulty lift
axle control!

A faulty lift axle control can have negative
effects on the handling characteristics of
the trailer. It can also change the vehicle
height or the distance from the road and
cause the trailer to get stuck in under-
passes.

► Only drive with properly functioning lift

axle control.

► In case of malfunction, contact an au-

thorised specialist workshop and have
the lift axle control repaired.

► In case of faults, have the lift axle con-

trol inspected by an authorised spe-
cialist workshop.

9.2

Fixing braking abnormalities

!

WARNING

Risk of accidents due to incorrect
brake tuning!

Incorrect brake tuning between tractor unit
and trailer can result in serious accidents.

► If necessary, carry out a brake power/

train tuning to obtain optimum brake
balance.

► Observe the reference brake values.

► Pay attention to the sticker on the

trailer.

Technically optimised function of the brake
system is only possible when trailer is com-
bined with the corresponding allocated
tractor unit. All components and the con-

«
...
104
105
106
107
108
...
»

Содержание LOAD CARRIER

































































































































Отзывы:

Нет отзывов

Похожие инструкции для LOAD CARRIER

Бренд: Silver Eagle Страницы: 17

Бренд: Tao Motor Страницы: 80

Бренд: Can-Am Страницы: 401

Бренд: X-TREME Страницы: 11

2014 RZR XP 1000

Бренд: Polaris Страницы: 474

Бренд: Qlink Страницы: 168

QUAD WILD HP 300 RV - 2005

Бренд: GAS GAS Страницы: 72

Бренд: Taylor-Dunn Страницы: 128

Бренд: Taylor-Dunn Страницы: 206

Бренд: Yamaha Страницы: 134

Бренд: U-Line Страницы: 8

GRIZZLY 450 YFM45FGY

Бренд: Yamaha Страницы: 164

Бренд: Yamaha Страницы: 112

Бренд: Yamaha Страницы: 59

2008 Rhino YXR45FX

Бренд: Yamaha Страницы: 12

Бренд: ROSSO MOTORS Страницы: 16

Бренд: ROSSO MOTORS Страницы: 17

Бренд: ROSSO MOTORS Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды