Krone LOAD CARRIER Скачать руководство пользователя страница 79

Страница: 79 / 128

SUPERSTRUCTURE OPERATION

Operating instructions • Load Carrier • 505410638-02 • 07/2019

Fig. 6-40:

Lifting out the tilting/plug-in post

Tilting/plug-in post

Post retainer

► Lift out the posts from the post retainer

on the chassis.

The posts have been removed.

Inserting the tilting/plug-in posts

► Insert the posts in the post retainer on

the chassis.

► Tilt the posts into the external beam

guides on the roof frame in the vertical
position.

The posts have been inserted.

► Fold up the board walls and lock them.

6.3.1.2 Fold-down posts

Fold-down posts have several sets of lath
sockets for plug-in laths.

Removing fold-down posts

CAUTION

Risk of injury due to falling posts!

The top part of the post can fall down and
injure people and cause material damage
when removing the fold-down posts.

► Proceed with the utmost caution when

lifting out the posts.

The centre posts are prepared for re-
moval

(see "6.3.1 Centre posts", pg. 77)

Fig. 6-41:

Fold-down post

External beam guide

Содержание LOAD CARRIER

































































































































Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Krone LOAD CARRIER, Руководство по эксплуатации, Страница: 79 / 128

Результаты поиска

Содержание LOAD CARRIER

Отзывы: