Krone LOAD CARRIER Скачать руководство пользователя

Страница: 61 / 128

SUPERSTRUCTURE OPERATION

Operating instructions • Load Carrier • 505410638-02 • 07/2019

Fig. 6-10:

Door lock lever engaged in the
Door Fix

Door Fix

Lever for Door Fix

Door lock lever

► Turn the door lock lever forwards to-

wards the direction of travel.

► Engage the door lock lever in the Door

Fix device.

The Door Fix is engaged.

Releasing the Door Fix

► Slide the lock on the Door Fix device

towards the centre of the vehicle.

► Pull out the door lock lever from the

lock.

The Door Fix is released.

6.1.4

Rear wall

WARNING

Risk of accident due to loss of load!

If the rear wall is unlocked and unsecured,
load falling out while driving can result in
personal injury and material damage.

► Check that the rear wall is locked be-

fore every trip.

CAUTION

Risk of injury due to the rear wall un-
controllably folding down!

An unlocked and unsecured rear wall can
suddenly fold down and cause personal
injury and material damage.

► When unlocking the last lock, hold

onto the rear wall with one hand.

CAUTION

Risk of accident due to folded-down
rear wall!

A folded-down rear wall can cover the
lighting equipment. This can cause rear-
end collisions while driving and with
parked trailers, causing material damage
and personal injuries.

► Drive and park only with a properly

closed and secured rear wall.

CAUTION

Risk of injury from falling loads!

Loads falling out can injure people and
cause material damage when the doors or
rear walls are opened, particularly with
double-deck loading.

► When opening the doors or rear walls,

always watch out for falling loads.

Depending on the version, the rear wall of
the KRONE trailer is equipped with
between two and four locks.

Folding down the rear wall

► If necessary, remove the curtain rope

and curtain on the rear end of the
vehicle.

Содержание LOAD CARRIER

































































































































Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды

Krone LOAD CARRIER, Руководство по эксплуатации

Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды