Krone LOAD CARRIER Скачать руководство пользователя

Страница: 53 / 128

RUNNING GEAR OPERATION

Operating instructions • Load Carrier • 505410638-02 • 07/2019

Fig. 5-42:

Post depot

Retainer plate

Removing the posts from the depot

► Slide the retainer plate upwards and

then to the side.

► Remove the posts.

The posts have been removed from
the depot.

Before each trip:

► Slide the retainer plate to the side and

then downwards.

The post depot is closed, locked, and
secured.

Storing the posts in the depot

► Slide the posts into the post depot next

to each other.

► Slide the retainer plate to the side and

then downwards.

The posts are stored in the post depot.

The post depot is closed, locked, and
secured.

5.18.2

Lath depot

WARNING

Risk of accident due to laths falling
out!

Laths that are not properly secured can
fall out while driving and cause accidents.

► Drive only with properly stored and

secured laths.

Depending on the design, the lath depots
are mounted on the left or right side of the
chassis. They provide space for wood,
steel, and aluminium plug-in laths.

Removing the laths from the depot

Fig. 5-43:

Lath depot

Spring cotter pin

Retainer bolt

► Remove the spring cotter pin.

► Remove the retainer bolt.

► Remove the laths.

The laths have been removed from the
depot.

Before each trip:

► Install the retainer bolt.

► Insert the spring cotter pin.

The laths are locked and secured.

Storing the laths in the depot

► Slide the laths into the lath depot to-

wards the centre of the vehicle.

► Secure one or several laths by moving

the retainer bolts.

The laths are stored in the depot.

The laths are locked and secured.

Содержание LOAD CARRIER

































































































































Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды

Krone LOAD CARRIER, Руководство по эксплуатации

Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды