Krone LOAD CARRIER Скачать руководство пользователя

Страница: 50 / 128

RUNNING GEAR OPERATION

Operating instructions • Load Carrier • 505410638-02 • 07/2019

► Secure the retainer rod with the spring

cotter pin.

► Fold down the side collision protection,

if necessary

(see "5.14 Side collision pro-

tection", pg. 46)

The spare wheel has been removed.

5.15.5

Changing the spare wheel

WARNING

Risk of accident caused by loose wheel
nuts!

Wheel nuts that are not tightened correctly
will come loose during travel, possibly
leading to serious accidents.

► Tighten the wheel nuts with the appro-

priate tightening torque.

► Check the tightness of the wheel nuts

after each wheel change, and again
shortly after the first laden journey.

WARNING

Risk of accident due to instability and
rolling away!

Unintentional trailer movements can
cause serious injury and property dam-
age.

► Secure the trailer against rolling away

by applying the parking brake.

► Use the wheel chocks to prevent the

trailer from rolling away.

► Park the trailer on a solid surface to

avoid sinking in or tipping.

► When the trailer is hitched/unhitched,

ensure stability. If necessary, use ad-
ditional supports.

CAUTION

Risk of injury due to a falling spare
wheel!

The weight of a falling spare wheel can
cause injuries.

► Work carefully when changing a spare

wheel.

INFO

The tightening torques for the wheel nuts
are noted in the axle manufacturer's sup-
plier documentation.

Removing the wheel

► Lock the tractor unit to prevent unin-

tended movement while changing the
wheel.

► Secure the tractor unit and trailer ac-

cording to the regulations for moving
traffic (warning sign, etc.).

► Use wheel chocks to prevent the

tractor unit and trailer from rolling away

(see "5.1 Using wheel chocks", pg. 22)

► Apply the parking brake on the trailer

(see "5.9.2 Parking brake", pg. 37)

► Loosen the wheel nuts by one turn.

► Place the jack under the axle as close

as possible to the defective wheel.

► Lift the axle with the jack until the de-

fective wheel no longer touches the
ground.

► Unscrew the wheel nuts and remove

them.

► Remove the defective wheel from the

axle.

The wheel is removed.

Mounting the spare wheel

► Remove the spare wheel from the

spare wheel bracket

(see "5.15 Spare

wheel bracket", pg. 47)

► Slide the spare wheel onto the wheel

hub.

► Screw on the wheel nuts and slightly

tighten.

► Lower the axle with the jack.

► Properly tighten the wheel nuts in a

criss-cross pattern. Please consult the
axle manufacturer's supplier docu-
mentation for the specified tightening
torque.

Содержание LOAD CARRIER

































































































































Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды

Krone LOAD CARRIER, Руководство по эксплуатации

Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды