manualshive.com logo in svg

Krone LOAD CARRIER, Руководство по эксплуатации, Страница: 55 / 128

Поделиться
Скачать
Krone LOAD CARRIER Скачать руководство пользователя страница 55

RUNNING GEAR OPERATION

Operating instructions • Load Carrier • 505410638-02 • 07/2019

55

Closing the tool box

► Fold up the lid.

► Fold down the locking flap.

► Secure the locking flap with a spring

cotter pin.

► Fold down the side collision protection,

if necessary 

(see "5.14 Side collision pro-

tection", pg. 46)

.

ü

The tool box is closed and secured.

5.20 

Water tank

 CAUTION

Health hazard due to neglected hy-
giene!

If the hygiene regulations are not ob-
served, the water may be contaminated.
This can result in a risk to health.

► Do not fill any fluids other than water

in the water tank.

► Ensure cleanliness and hygiene.

NOTE

Material damage due to frost!

Frost can damage a filled water tank.

► Do not completely fill the water tank if

there is a risk of frost.

KRONE trailers can be equipped with a
water tank. The water tank is installed on
the frame under the chassis and is used to
transport water.

1

2

Fig. 5-46:

Water tank

1

Filler neck with screw cap

2

Water tap

Using the water tank

► Fill water through the filler neck.

► Close the filler neck with the screw

cap.

► Draw water using the water tap on the

water tank.

► Close the water tap.

5.21 

Fire extinguisher

Unmaintained and unchecked fire extin-
guishers may not work in an emergency
and will not be able to fight any potential
fires. Used fire extinguishers must be re-
placed after a single use. Additional in-
structions can be found on the housing of
the fire extinguisher.

1

Fig. 5-47:

Storage box

1

Quick-release fasteners

Содержание LOAD CARRIER

































































































































Отзывы:

Нет отзывов