Krone LOAD CARRIER Скачать руководство пользователя

Страница: 22 / 128

RUNNING GEAR OPERATION

Operating instructions • Load Carrier • 505410638-02 • 07/2019

Running gear operation

5.1

Using wheel chocks

WARNING

Risk of accident due to improperly
used wheel chocks!

Unintentional trailer movements and im-
proper use of wheel chocks can result in
serious injury and property damage.

► Secure the tractor unit additionally

with wheel chocks when unhitching.

► Secure the unhitched trailer with

wheel chocks.

► Place wheel chocks only on wheels

mounted on rigid axles, never on
wheels mounted on lift axles or steer-
ing axles.

► Always secure wheel chocks on the

trailer with the appropriate securing
devices before travel.

5.1.1

Wheel chocks without anti-theft
device

Removing the wheel chocks

► Remove safety split pin.

► Pull the wheel chocks off the retaining

rod.

The wheel chocks have been re-
moved.

Stowing the wheel chocks

► Slide the wheel chocks onto the retain-

ing bar.

► Secure the wheel chocks with the

safety split pins.

The wheel chocks are stowed and se-
cured.

5.1.2

Wheel chocks with anti-theft
device

Removing the wheel chocks

► Remove safety split pin.

► Pull out the wheel chocks with the theft

protection chains.

The wheel chocks have been re-
moved.

Stowing the wheel chocks

► Insert the wheel chocks into the

bracket.

► Secure the wheel chocks with the

safety split pins.

► Thread the theft protection chain in the

bracket.

The wheel chocks are stowed and se-
cured.

5.1.3

Wheel chocks with spring-clip
mount

Removing the wheel chocks

► Depending on the design, push down

or pull up the spring clip.

► Remove the wheel chock.

The wheel chocks have been re-
moved.

Stowing the wheel chocks

► Depending on the design, push down

or pull up the spring clip.

► Insert the wheel chock in the bracket.

► Secure the wheel chock with the

spring clip.

The wheel chocks are stowed and se-
cured.

Содержание LOAD CARRIER

































































































































Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды

Krone LOAD CARRIER, Руководство по эксплуатации

Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды