Krone LOAD CARRIER Скачать руководство пользователя

Страница: 89 / 128

ROAD OPERATIONS

Operating instructions • Load Carrier • 505410638-02 • 07/2019

NOTE

Material damage due to improper hitch-
ing and unhitching

Improper hitching and unhitching can
cause damage to the trailer.

► Before hitching and unhitching, set

the trailer's draw gear to the corres-
ponding height of the tractor unit's
trailer coupling.

► When hitching and unhitching, also

observe the instructions from the
tractor unit's operating instructions.

INFO

More information is available from the en-
closed supplier documentation and BG in-
formation "Safe coupling of trailers".

Fig. 7-1:

Coupling ring

Hitching the central axle trailer

► Before coupling, check:

○

Is the tractor unit's permissible towing
capacity adequate for the trailer?

○

Has the permissible drawbar load
been observed?

○

Has the permitted maximum length
been observed?

○

Do the tractor unit's trailer coupling
design and the trailer's coupling eye
design match?

○

Do the position of the draw gear and
the coupling height match?

► Apply the parking brake on the trailer

(see "5.9.2 Parking brake", pg. 37)

► Use wheel chocks to prevent the trailer

from rolling away

(see "5.1 Using wheel

chocks", pg. 22)

► Move the tractor unit towards the

coupling ring, leave approx. 1 m dis-
tance.

► Set the height of the coupling ring to

the centre of the coupling funnel or to
the height of the lowest lip on the
coupling funnel.

► Use the coupling's hand lever to move

the coupling bolts to the “opened” posi-
tion.

► Lock the coupling funnel in open posi-

tion.

► Vacate the danger area between the

tractor unit and trailer!

► Begin coupling by backing up the

tractor unit. The coupling automatically
takes place.

► Apply the parking brake on the tractor

unit

(see "5.9.2 Parking brake", pg. 37)

► Check if the coupling bolt is properly

locked into place.

► Connect the supply and control lines

(see "5.6 Supply and control connections",
pg. 31)

► Retract the landing leg winches

(see

"5.2 Landing leg winches", pg. 23)

► Remove the wheel chocks and prop-

erly secure them

(see "5.1 Using wheel

chocks", pg. 22)

► Disengage the parking brake on the

trailer

(see "5.9.2 Parking brake", pg. 37)

► Set the air suspension to the driving

position

(see "5.10 Air suspension",

pg. 41)

► Carry out a departure check

(see "7.1

Commissioning before each trip", pg. 88)

The central axle trailer is hitched and
ready to drive.

Содержание LOAD CARRIER

































































































































Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды

Krone LOAD CARRIER, Руководство по эксплуатации

Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды