Krone LOAD CARRIER Скачать руководство пользователя

Страница: 111 / 128

MAINTENANCE AND REPAIR

Operating instructions • Load Carrier • 505410638-02 • 07/2019

111

The aim of maintenance is:

○

that the commissioned trailer is kept
operating safely and performing prop-
erly during use,

○

to prevent downtimes,

○

to keep the costs of operational readi-
ness reasonable and financially justifi-
able,

○

and to limit unavoidable repair ex-
penditures.

10.2.1

Regular checks and functional
testing

To ensure that the trailer is in proper oper-
ating condition, the safety-related equip-
ment must be checked regularly for proper
function, its effectiveness must be ensured
and the recurring inspections must be per-
formed.

► Prior to starting each trip, perform a

departure check

(see "7.1 Commissioning

before each trip", pg. 88)

► Perform legally prescribed general in-

spections punctually.

► Observe the intervals and instructions

for testing and maintenance of the
supplied components (e.g. axles) con-
tained within the respective supplied
operating instructions.

► Report any detected safety defects:

○

Take the trailer out of operation if oper-
ational safety is not ensured.

○

When there is a change of shift, inform
the colleague starting the next shift
about observed defects and implemen-
ted measures.

► Perform the following checks and func-

tional testing at the intervals pre-
scribed:

Daily, or before every journey

Component

Inspection

Rear underrun pro-
tection/side collision
protection

► Visually inspect

for wear, dam-
age and proper
attachment.

Compressed air tank

► Actuate the wa-

ter drain valve

(see "5.8 Draining
the compressed
air tanks", pg. 35)

Lighting equipment

► Visually inspect

to make sure it
is working prop-
erly.

Hydraulic rear width
expansion (optional)

Visually inspect for
wear, damage, leak-
age and proper at-
tachment, perform a
functional test on the
pump.

Coupling ring

► Visual check for

wear, damage
and proper at-
tachment.

Draw fork

► Visual check for

wear, damage
and proper at-
tachment.

► Lubricate the

spring bolt on
the base shoe.

Drawbar wale

► Visual check for

wear, damage
and proper at-
tachment.

Weekly

Component

Inspection

Compressed air tank

► Perform a visual

inspection for
wear and dam-
age.

Tyres

► Check the tread

depth and tyre
pressure

Содержание LOAD CARRIER

































































































































Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды

Krone LOAD CARRIER, Руководство по эксплуатации

Результаты поиска

Содержание LOAD CARRIER

Отзывы:

Похожие инструкции для LOAD CARRIER

Бренды по названию

Популярные бренды