64
RDH Ext. ID:
Rapid Dual Homing Extension ID. The Extension ID and Ring ID cannot be
the same, when dual home to the same foreing network. The Extension ID range from 0 to
7. With the combination of Extension ID(0 to 7) and Ring ID(0 to 31), we can now support
up to 256(8*32) different dual homing rings
In Rapid Dual Homing, you don’t need to configure specific port to connect to other
protocol. The Rapid Dual Homing will smartly choose the fastest link for primary link and
block the other entire link to avoid loop. If the primary link failed, Rapid Dual Homing will
automatically forward the secondary link for network redundant. Of course, if there are
more connections, they will be standby links and recover one of then if both primary and
secondary links are broken.
Ring status:
To enable/disable the Ring. Please remember to enable the ring after you add
it.
Super Chain Configuration
ID:
The Ring Identifier referring to this Ring(Chain).
Role:
Super Chain has two node role Border and Member. Border is the node which
connect to foreign network. Member is the node except the Border node in the Super
Chain.
Edge Port:
Edge Port is one of ring ports of Border node. It is used to connect to foreign
network.
MultiRing:
The MultiRing technology is one of the patterns of the MSR technology; the
technology allows you to aggregate multiple rings within one switch. Create multiple Ring
ID and assign different ring port 1 and port 2 to each ring, thus the switch can have multiple
rings in one JetNet switch.
When implementing MultiRing, remember that the different rings can NOT use the same
ring ID. The other settings are the same as above description. Technically, the maximum
ring volume the MultiRing supported is up to 16 rings. Due to the port volume limitation, the
mximum value is half of the port volume of a switch.
TrunkRing:
The MultiRing technology is part of the MSR technology which combines the
MSR with the port trunking technology. After multiple ports aggregated, this is so-call port
trunking (Static or learnt by LACP protocol), the Trunk ID can be one of the port ID of the
MSR technology. Configured the port trunking first then you can add the Trunk group as a
Ring Port in managed switch.
4.4.8
Ring Info
This page shows the MSR information.
