75
VLAN Configuration group enables you to Add/Remove VLAN, configure port
Ingress/Egress parameters and view VLAN table.
Following commands are included in this group:
4.5.1 VLAN Port Configuration
4.5.2 VLAN Configuration
4.5.3 GVRP Configuration
4.5.4 VLAN Table
4.5.5 CLI Commands of the VLAN
4.5.1
VLAN Port Configuration
VLAN Port Configuration allows you to set up VLAN port parameters to specific port. These
parameters include PVID, Accept Frame Type and Ingress Filtering.
Figure 4.5.2 Web UI of VLAN configuration.
PVID:
The abbreviation of the
Port VLAN ID
. Enter port VLAN ID here. PVID allows the
switches to identify which port belongs to which VLAN. To keep things simple, it is
recommended that PVID is equivalent to VLAN IDs.
The values of PVIDs are from 0 to 4095. But, 0 and 4095 are reserved. You can’t input
these 2 PVIDs. 1 is the default value. 2 to 4094 are valid and available in this column. Type
the PVID you’d like to configure here.
