110
allowance
Any
11111111.11111111.
11111111.11111111
All
All IP addresses.
Or a mask:
255.255.255.255
Host
0.0.0.0
1
Only the Source or
Destination host.
0.0.0.3
0.0.0.(00000011)
3
0.0.0.7
0.0.0.(00000111)
7
0.0.0.15
0.0.0.(11111111)
15
….
Note:
The mask is a wildcard mask: the high-order bits of the mask that are binary zeros
determine how many corresponding high-order bits in the IP address are significant. The
selected action applies to any source address with these high-order bits.
Protocol:
Select a protocol you want associate with the filter. The field includes IP, TCP,
UDP or ICMP type.
Destination Port:
TCP/UDP port of the Destination Port field.
ICMP Type:
The ICMP Protocol Type range from 1 ~ 255.
ICMP Code:
The ICMP Protocol Code range from 1 ~ 255.
Egress Port:
Bind this Filter to selected egress port.
Click the
Add
button to add the rule to the Filter. Click the
Remove
button to remove the
selected rule from Filter. Click the
Modify
button to edit the rule which you selected. Click
the
Reload
button to reload the rule table.
Click the
Apply
button to apply the Filter configurations.
