77
4.5.2
VLAN Configuration
In this page, you can assign Management VLAN, create the static VLAN, and assign the
Egress rule for the member ports of the VLAN.
Figure 4.5.2.1 Web UI of the VLAN Configuration.
Management VLAN ID:
The switch supports management VLAN. The management
VLAN ID is the VLAN ID of the CPU interface so that
only member ports of the
management VLAN can ping and access the switch.
The default management VLAN
ID is
1
.
Static VLAN
: You can assign a VLAN ID and VLAN Name for new VLAN here.
VLAN ID
is used by the switch to identify different VLANs. Valid VLAN ID is between 1 and
4094. 1 is the default VLAN.
VLAN Name
is a reference for network administrator to identify different VLANs. The
available character is 12 for you to input. If you don’t input VLAN name, the system will
automatically assign VLAN name for the VLAN. The rule is VLAN (VLAN ID).
Figure 4.5.2.2 The steps to create a new VLAN: Type
VLAN ID and NAME, and press
Add
to create a new
VLAN. Then you can see the new VLAN in the Static
VLAN Configuration table. Refer to Figure 4.5.2.3
After created the VLAN, the status of the VLAN will
remain in Unused until you add ports to the VLAN.
