52
Switch(config)# trunk group 2 fa11-12
Can't set trunk group 2 enable!
The group 2 is a static aggregation group.
Display – LACP
Switch# show lacp
counters LACP statistical information
group LACP group
internal LACP internal information
neighbor LACP neighbor information
port-setting LACP setting for physical interfaces
system-id LACP system identification
system-priority LACP system priority
SWITCH# show lacp port-setting
LACP Port Setting :
Port Priority Timeout
----- --------- --------
1 32768 Long
2 32768 Long
3 32768 Long
……….
Switch# show lacp internal
LACP group 1 internal information:
LACP Port Admin Oper Port
Port Priority Key Key State
----- ----------- -------- -------- -------
8 1 8 8 0x45
9 1 9 9 0x45
10 1 10 10 0x45
LACP group 2 is inactive
LACP group 3 is inactive
LACP group 4 is inactive
Display - Trunk
Switch# show trunk group 1
FLAGS: I -> Individual P -> In channel
D -> Port Down
Trunk Group
TGID Protocol Load-Balance Ports
-----+---------+------------+-------------------------------------
1 Static src-dst-mac 11(D) 12(P)
