104
4.9.3
SNMP Traps
SNMP Trap is the notification feature defined by SNMP protocol. All the SNMP
management applications can understand such trap information. So you don’t need to
install new application to read the notification information.
This page allows users to
Enable SNMP Trap,
configure the
SNMP Trap server IP
,
Community
name, and trap version
V1 or V2c
.
After configuration, you can see the
change of the SNMP pre-defined standard traps and Korenix pre-defined traps. The
pre-defined traps can be found in Korenix private MIB.
4.9.4
CLI Commands of the SNMP
Command Lines of the SNMP configuration
Feature
Command Line
SNMP Community
Read Only Community Switch(config)# snmp-server community public ro
community string add ok
Read Write Community Switch(config)# snmp-server community private rw
community string add ok
SNMP Trap
Enable Trap
Switch(config)# snmp-server enable trap