34
Once you finish selecting and configuring the settings, click on
Backup
or
Restore
to run
Figure 4.2.7.1 Main UI of Backup & Restore
Figure 4.2.7.2 Bacup/Restore Configuration – Local File mode.
Click on Folder icon to select the target file you want to backup/restore.
Note:
It is not allowed to type in space key in the path of folder of backup file.
Figure 4.2.7.3 Backup/Restore Configuration – TFTP Server mode
Type the IP address of TFTP Server IP. Then click on
Backup/Restore
.
Note:
point to the wrong file can cause the entire configuration missed
Technical Tip:
Default Configuration File:
The switch provides the default configuration file in the
system. You can use Reset button, Reload command to reset the system.
Running Configuration File:
The switch
’s CLI allows you to view the latest settings
running by the system. The information shown here is the settings you set up but
have
n’t saved to flash. The settings not yet saved to flash will not work after power
recycle. You can
use
show running-config
to view it in CLI.
