78
Note:
Before you change the management VLAN ID by Web and Telnet, remember that
the port attached by the administrator should be the member port of the management
VLAN; otherwise the administrator can’t access the switch via the network.
Note:
JetNet 5020G supports max 255 groups of VLAN.
Static VLAN Configuration
You can see the created VLANs and specify the egress (outgoing) port rule to be
Untagged or Tagged
here.
Figure 4.5.2.3 Static VLAN Configuration table. You can see that new VLAN 3 is created.
VLAN name is test. Egress rules of the ports are not configured now.
Figure 4.5.2.4 Configure Egress rule of the ports.
--
: Not available
U
:
Untag
: Indicates that egress/outgoing frames are not VLAN tagged.
T
:
Tag
: Indicates that egress/outgoing frames are to be VLAN tagged.
Steps to configure Egress rules: Select the VLAN ID. Entry of the selected VLAN turns to
light blue. Assign Egress rule of the ports to
U
or
T
. Press
Apply
to apply the setting. If you
want to remove one VLAN, select the VLAN entry. Then press
Remove
button.
