70
dly
-------- -------------- -------- ----------- ------ ----- ----- -----
MST00 0012.77ee.eeee 32768 0 N/A 20 2
15
MST01 0012.77ee.eeee 32768 0 N/A 20 2
15
MST02 0012.77ee.eeee 32768 0 N/A 20 2
15
MSTP Instance
Information
Switch# show spanning-tree mst 1
###### MST01 vlans mapped: 2
Bridge address 0012.77ee.eeee priority 32768 (sysid 1)
Root this switch for MST01
Port Role State Cost Prio.Nbr Type
------ ---------- ---------- -------- ---------- ------------------
fa1 Designated Forwarding 200000 128.1 P2P
Internal(MSTP)
fa2 Designated Forwarding 200000 128.2 P2P
Internal(MSTP)
MSTP Port
Information
Switch# show spanning-tree mst interface fa1
Interface fastethernet1 of MST00 is Designated Forwarding
Edge Port : Edge (Edge) BPDU Filter : Disabled
Link Type : Auto (Point-to-point) BPDU Guard : Disabled
Boundary : Internal(MSTP)
BPDUs : sent 6352, received 0
Instance Role State Cost Prio.Nbr
Vlans mapped
-------- ---------- ---------- -------- ---------- ---------------------
0 Designated Forwarding 200000 128.1
1,4-4094
1 Designated Forwarding 200000 128.1 2
2 Designated Forwarding 200000 128.1 3
Multiple Super Ring
Create or
configure a Ring
Switch(config)# multiple-super-ring 1
Ring 1 created
Switch(config-multiple-super-ring)#
Note: 1 is the target Ring ID which is going to be created or
configured.
Delete a Ring
Switch(config-multiple-super-ring)# delete
Ring 1 delete.
Switch(config)#
Note: It will exit from
multiple-super-ring configuration mode
after delete this ring.
Enable a Ring
Switch(config-multiple-super-ring)# start
Start Multiple Super Ring success
Disable a Ring
Switch(config-multiple-super-ring)# stop
Stop Multiple Super Ring success.
Change Ring
name
Switch(config-multiple-super-ring)# name MSR1
Note: Default Ring name is
“Ring1”, 1 is the Ring ID.
Super Ring
Version
Switch(config-multiple-super-ring)# version
default set default to rapid super ring
rapid-super-ring rapid super ring
Switch(config-multiple-super-ring)# version rapid-super-ring
Priority
Switch(config-multiple-super-ring)# priority
<0-255> valid range is 0 to 255
