Konica Minolta CS-7, Руководство по эксплуатации

Страница: 309 / 424

309
7 .14 Merging and separation of studies
Chapter 7
HINT •••••••••••••••••••••••••••••••••••••
• When an accession number is used for the search, you
can change the status of every study related to the pa-
tient ID to the unexposed study. When using this func -
tion, contact Konica Minolta technical representatives .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
4
Press [Search] .
• A confirmation screen is displayed.
HINT •••••••••••••••••••••••••••••••••••••
• When there are multiple sets of study results, the se-
lection screen that is displayed when multiple relevant
studies have been found is displayed . If you select a
destination to combine studies in and press [Execute],
the confirmation screen shown in Step 5 is displayed.
• The suspended or completed studies may be dis-
played depending on settings . To merge (reassign)
studies, select unexposed studies.
• If you press [To List] on the selection screen that is
displayed when multiple relevant studies have been
found, you return to the list screen . If the study to be
merged cannot be found after searching with the cor-
rect search terms, return to the list screen and redo
the search .
• Press [Cancel] to return to the search screen. When
there is a mistake in the search terms, return to the
search screen, enter the correct search terms, and
redo the search .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
5
Press [OK] .
• Press [Cancel] to return to the search screen.
• The studies are combined and the display re-
turns to the list screen .
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• The study to be merged is suspended and the merging
examination is deleted.
• Depending on the setting, you can leave the merging
study in an unexposed state.
When leaving the merging study, check the [Retain
the source study] check box in the merge confirmation
dialog window and then press [OK].
• When using the [Retain the source study] option, if the
data has already been sent to an external system or
you want to recreate the study as a new examination,
check the [Update the source study as new study]
checkbox and press [OK].
• If you press [OK] without checking the check box, the
merging study is deleted .
• For the setting procedure, contact Konica Minolta
technical representatives .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT •••••••••••••••••••••••••••••••••••••
• Press [Cancel] on the confirmation screen to return to
the search screen .
If the search conditions are not correct when checked,
press [Cancel] to return to the search screen and re -
enter the correct search terms .
•••••••••••••••••••••••••••••••••••••••••••••••••••••