Konica Minolta CS-7, Руководство по эксплуатации

Страница: 155 / 424

155
Chapter 6
6.4 Functions of the exposure screen
• The preview is displayed .
• Press [OK], and the preview disappears.
IMPORTANT
••••••••••••••••••••••••••••••••••••
• Confirm that the overlay is reflected at the output des -
tination .
• The gird/scale markings (Grid/Measure 1/Measure 2)
are not measurement functions . Do not use them to
measure images .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT •••••••••••••••••••••••••••••••••••••
• The set characters and stamp are as follows .
Marker type Characters
Marker 1 R, L
Marker 2
A→P, P→A, R→L, L→R, RAO,
LAO, RPO, LPO, C→C, M→L,
M→R
Stamp
Set at installation .
Grid/scale type Details
Grid
Displays approx. 50mm square
grid
Measure 1
Displays a scale around an
image . The scale interval at life
size output is approx. 10mm.
Based on this, the scale inter-
val also reduces according to
the zoom out ratio when zoom-
ing out .
Measure 2
Displays a scale on the right
center and bottom center of an
image . The scale interval at life
size output is approx. 10mm.
Based on this, the scale inter-
val also reduces according to
the zoom out ratio when zoom-
ing out .
*
Grid and scale cannot be displayed at the same time .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
6 .4 .23 Highlight function for
the tube/gauze
This function highlights the tube and/or gauze in cap-
tured images .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• The highlight function for the tube/gauze is available
for the images of the following body parts .
Front view of the chest
Front view of the abdomen
Front and side views of the
head
Front view of the child
chest
Infant chest and abdomen
Auditory organ
Side view of the lumbar
spine
Maniphalanx bones - Over -
all view
Toe
Side view of the chest
Side view of the abdo-
men
Towne view of the head
Side view of the child
chest
Newborn chest
Cervical division
Cystography
Tarsal
Toe phalanges - Overall
view
• When the highlight function for the tube/gauze is not
OFF, the [E process], [F process], [Hybrid], [Tool], and
[IG] buttons cannot be operated on the [Image control]
or [QUICK] tabs on the control panel. Also, the E, F,
and HS parameters cannot be changed on the viewer
screen .
• In the case where the S/G value etc . were changed af-
ter the level of the highlight function for the tube/gauze
has been changed, when the function is turned off af -
ter that, the image returns to that before the level was
changed, and consequently the S/G value etc . return
to the former values .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT •••••••••••••••••••••••••••••••••••••
• When an image with a highlighted tube/gauze is
shared with this device which is not licensed for the
highlight function, the image will be displayed with the
highlighted tube/gauze, but you cannot change the
highlight level or deactivate the highlight function with
this unlicensed device .
•••••••••••••••••••••••••••••••••••••••••••••••••••••