Konica Minolta CS-7, Руководство по эксплуатации

Страница: 157 / 424

157
Chapter 6
6.4 Functions of the exposure screen
z
Select the output of highlighted tube/gauze
image
Switch the output settings of highlighted tube/gauze
image .
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• This function is available for the host output only .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
1
Long press the [Tube/Gauze] button more
than 1 second .
• The highlighting level change dialog is dis-
played .
2
Change the image output settings on the
highlighting level change dialog .
• When the [Tube/Gauze ON & OFF] is pressed,
both the normal and highlighted images are out-
put during host output .
• When the [Tube/Gauze ON Only] is pressed,
only the highlighted image is output during host
output .
HINT
•••••••••••••••••••••••••••••••••••••
• The order of normal and highlighted image output can
be changed . For more details, contact Konica Minolta
technical representatives .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
6 .4 .24 Automatic 1×1 display
function
When examining with a 2×2 display screen or a 3×2
display screen, they can be changed to a 1×1 display
screen automatically when the exposed image is re -
ceived .
The following procedure describes an example of
what happens when, while having the screen display
set to 2×2, exposure is carried out with the automatic
1×1 display function enabled. The exposure order and
body parts are as follows .
(1) (2)
CHEST _ Chest
Erect _ Front
CHEST _ Chest
Erect _ LAT
* Numbers (1), (2) displayed on the screen are shown
for ease of explanation, and not displayed on the
actual screen .
1
Perform exposure (1) .
• Set up the X-ray device before exposure. Per -
form exposure after checking the exposure set -
tings .
Press the exposure switch
(1) (2)