Konica Minolta CS-7, Руководство по эксплуатации

Страница: 210 / 424

210
7.2 Exposure with AeroDR Portable RF Unit2
7 .2 .3 New registration of
patient information
New registration of patient information is performed
with the patient registration screen . Select the
[PatientReg.] tab on the initial screen to display the pa -
tient registration screen .
1
Press the column for the patient ID .
2
Press the input panel, and input the patient ID .
3
Press [Enter] .
4
Input patient name, sex and date of birth .
• After each inputting item, press [Enter].
• If you press [Enter], the cursor will move to the
next item.
HINT
•••••••••••••••••••••••••••••••••••••
• If the length of an entry exceeds the dimensions of the
display pane of the item or if the entry spreads across
multiple lines, the long-sentence comment pop-up but-
ton [ ] is displayed.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
7 .2 .2 Exposure preparations
The exposure preparation of the AeroDR Portable RF
Unit2 is performed according to the following proce-
dure .
1
Prepare each device to perform exposure .
• For information on how to prepare each device
to perform exposure, refer to "AeroDR Portable
RF Unit2 Operation Manual" .
2
Turn each device on .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• After the access point has started, it may take some
time to establish a wireless connection .
• To register the DR Detector, connect this device to the
AeroDR Portable RF Unit2 in wired mode .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
3
Turn the mobile X-ray device on .