Konica Minolta CS-7, Руководство по эксплуатации

Страница: 14 / 424

14
Introduction
Structure of pages
00
1.1 Operation Flow
1.1.1 Displaying the exposure
screen
Perform the following procedure when to display the
exposure screen.
1
Turn on the power for X-ray devices, etc.
connected to this device.
2
Press the power switch on this device.
• Startup messages are displayed sequentially.
• Internal system initialization is performed while
the system startup screen is displayed.
• Upon completion of initialization, the initial
screen (list screen) is displayed.
IMPORTANT •••••••••••••••••••••••••••••••••••••
• When sharing a REGIUS among several units of this
device, start the unit with the JM installed first; after
confirming startup of this unit, start the other units.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT •••••••••••••••••••••••••••••••••••••
• The software version is displayed on the system
startup screen. Initialization will be completed a few
minutes after turning on the power.
• A progress bar is displayed on the system startup
screen, indicating the status of the system initialization
process.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
3
Select the examination target.
• The examination is selected.
4
Press [Perform].
• The exposure screen is displayed
.
Example of page structure
(1)
(2)
(3)
(4)
(5)
Number Item Description Icon
(1) Item heading Describes the titles of described content . -
(2) Operation procedure The operating procedure is described in sequential numerical
steps .
-
(3) Screen display Shows a screen on which operations are performed . -
(4) Important items Describes important items for operation . Be sure to read them . IMPORTANT
(5) Hint Describes important information . HINT