Konica Minolta CS-7, Руководство по эксплуатации

Страница: 22 / 424

22
1 .2 Safety precautions
WARNING
• Image processing functions must be used by quali-
fied persons with specialized knowledge of image
diagnosis equipment and image processing . In ad-
dition, sufficiently confirm the results of image pro -
cessing .
• Do not perform diagnosis with the images displayed
on this device .
• Risk of misidentification of patients may occur if
modifications to patient information for examina -
tions or examination information acquired from a
higher system such as a Radiology Information
System (RIS) are made . When the information is
modified, notify the system administrator of the
modification without delay, and in addition, make
sure that the patient information and/or examination
information are correctly modified on output devices
such as PACS to which this device sent the image
information and examination information.
• Konica Minolta will not be liable for the loss of im-
portant data such as patient information arising
from the introduction of this system . Important data
require separate assurance of security, backup, etc .
• When lightning is likely to occur, stop work and
unplug the power plug from the wall outlet . When it
thunders before unplugging the power plug do not
touch the device, including any of the cables . Doing
so may cause a fire or electric shock.
• If there is any smoke, odor, or abnormal sound, it
may cause a fire if use is continued, so immediately
turn the power switch off, unplug the power plug
from the wall outlet, and contact Konica Minolta
technical representatives .
• Take the following precautions when using this de-
vice and software .
– Konica Minolta or a contractor designated by
Konica Minolta will install the software of this de-
vice .
– Do not disassemble or modify this device .
– Do not connect any devices that were not pur-
chased from Konica Minolta .
– Do not install software purchased from other
companies .
– Do not uninstall software that has already been
installed .
– Take precautions to prevent infection from com-
puter viruses .
– Do not change the setting for the OS (operating
system), or delete folders or files.
– Do not operate Windows Explorer unless speci -
fied.
– Do not use the DVD drive for other purposes .
– Confirm that the hard disk access lamp is out
before removing disks .
– Do not turn the power switch off or pull out the
power cable while the system is operating .
WARNING
• Take note of the following to reduce the risk of fire,
electric shock, or electrical leakage:
– Always use the specified cables such as a pow -
er cable .
– Use wall outlet with the correct rating as a power
source .
– Connect the power plug to the wall outlet prop-
erly without any slack .
– Use a power source with a ground wire .
– If you do not plan to use this device for an ex -
tended period of time, unplug the power plug .
– The supplied power cable is dedicated for this
device, so do not use it elsewhere .
– Avoid exposure to liquids such as water.
– Make sure that foreign material, such as pieces
of metal or wires, does not get inside .
– Do not handle the power plug with wet hands .
– Do not let dirt or dust adhere to the power plug .
– Do not use extension cables.
– Do not place many loads on a single electrical
outlet .
– Do not damage the power cable . Also, do not
use damaged cables .
– Do not block the ventilating openings .