Konica Minolta 0902, Руководство по обслуживанию

Страница: 69 / 302

Chapter 3 Troubleshooting
3-15
3.2.5 06200 ~ 06231: Insertion ShutterMotor Errors
•
Error codes S column: Errors at the read operation/calibration.
•
Error codes E column: Errors during erase operation.
•
Error codes I column: Errors during initialization.
References for response method
•
See "2.5.1 Insertion Unit (Page 2-11)" for the position of the ShutterMotor, the shutter open
detection sensor, and the shutter close detection sensor.
•
See "2.5.8 Framework (Page 2-19)" for the position of the MDU.
•
See "5.3.12 Replacing the Shutter Unit (Page 5-36)" for the method to replace the shutter unit.
•
See "5.3.9 Replacing the Shutter Open Detection Sensor (Page 5-31)" for the procedure to replace
the shutter open detection sensor.
•
See "5.3.10 Replacing the Shutter Close Detection Sensor (Page 5-33)" for the procedure to
replace the shutter close detection sensor.
•
See "5.3.11 Replacing the Shutter Motor (Page 5-35)" for the procedure to replace the ShutterMotor.
•
See "5.10.2 Replacing the MDU (Page 5-116)" for the procedure to replace the MDU.
Error code Description of the error Response
(References to replacement methods are
listed at the end of the table.)
S E I
06200 06215 06230 Insertion shutter open error
There was a trouble with the
motor control for the opening
action of the insertion shutter.
1. Confirm there are no foreign objects in
the shutter unit, and remove it if there
are any.
2. Confirm following and replace the
faulty parts.
•
Shutter unit
(if it is not deformed)
•
Shutter open detection sensor
•
Sensor wire:
JP35 ~ MCN1 (MDU)
•
Shutter close detection sensor
•
Sensor wire:
JP36 ~ MCN1 (MDU)
•
ShutterMotor
•
Motor wire:
JP20 ~ MCN1 (MDU)
•
MDU
06201 06216 06231 Insertion shutter close error
There was a trouble with the
motor control for the closing
action of the insertion shutter.