Konica Minolta 0902, Руководство по обслуживанию

Страница: 20 / 302

Chapter 1 Safety Warnings and Cautions
1-8
1.2.5 Caution During Service
1.2.6 Treatment of Disposed Parts
Do not insert wire or metal pieces
Do not insert foreign objects such as wire or metal pieces from the air holes or the gap of
the body. There is a danger of electrification.
Always turn OFF the power supply during service
There is a risk of major incident when the PCB inside the equipment, connectors, or
cables are pulled out with the power supply still ON.
Always perform these operation with the power supply switch in the OFF position.
Do not detach the lithium battery without discretion
A lithium battery is installed on the CIU PCB in the equipment. There is a risk of explosion
when the lithium battery is placed near the fire or place in the water.
Use the wrist band when handling the electronic parts inside the equipment
Use the anti-static wrist band when handling the electronic parts inside the equipment.
It is possible to damage the electronic part by touching it with static buildup.
Unplug the power supply or turn the power switch to OFF while cleaning
Always unplug the power supply or turn the power switch to OFF while cleaning the
equipment.
There is a risk of pinching your finger on the sliding or rotating parts.
This equipment, accessories, and packaging material are considered as
industrial waste.
Always request a licensed industrial waste disposal firm in accordance to local
regulations/rules to dispose them.