Konica Minolta 0902, Руководство по обслуживанию

Страница: 125 / 302

Chapter 5 Disassembly and Assembly
5-5
5.2.2 Moving the Equipment
Move the equipment to a place available for servicing if it is hard to operate service at the installation site.
Moving to the Maintenance Space
1
Move the optical unit to the second front side and
fix it using the simple fixing lock.
2
Loosen the adjusters (4 locations).
3
Move the equipment to a place capable of
operation.
Secure a space of 600 mm or more in four directions.
4
Fix the equipment so that it will not move using
the adjusters (4 locations) after moving it.
5
Release the simple fixing lock.
Lock will be released by pulling up the blue knob.
Now, you have finished with the procedures for moving the equipment to the maintenance space.
Note
•
When the optical unit moves all the way
toward the front, fixing shaft will
automatically lower to lock.
•
The second front door that is locked with
the simple fixing lock cannot be fully
closed. (for the purpose of preventing
the unit from being left locked).
Over 600 mm Over 600 mm
Over 600 mm
Over 600 mm
Important
Push the optical unit slightly towards the
back when pulling up the knob. Fixing shaft
might move down, and get locked again if
the optical unit is at its hithermost position.
Also, move the optical unit to confirm that
the fixing shaft is not lowered after
unlocking.