Kohler SFGLD360 Скачать руководство пользователя страница 159

Страница: 159 / 314

PRODUCT INFORMATION

INDEX

DATE

Dep. 8

IM-G-C-00-004e A

March 2016

LIFTING SYSTEM FOR SFGLD/SFGM V ENGINE

1/5

1 GENERAL REGULATION

Always be careful when the lifting the engine or its components.

Keep all the personnel away and do not walk under or around the engine when is lifted.

Inspect all anchoring points to make sure that there are no faulty welds, loose bolts, etc., which could make

the lifting of the engines dangerous.

Be sure that the apparatus used for the lifting has been inspected, that it is in good condition and that it can

bear the weight of the engine plus 10%. If you are not sure, weight the engine before raising it.

The use of cloth slings is recommended in order to prevent damage to the engine with sharp movements.

Ensure that the slings do not make contact with sensitive parts of the engine.

Before raising the engine, make sure that it is a balanced as possible. If necessary, use slings of different

lengths.

Do not raise the engine higher than necessary.

This IP is for SFLD/SFGM V engines except of SFGLD360for continuous operation application. For this

engine consult it in IT-G-A-70-001e.

MODEL

WEIGHT (KG)

WEIGHT (LB)

360

4200

9300

480

5500

12000

SFGLD/SFGM560

5800

12800

CAUTION

WARNING

3.1.1

O&M_2.002211.810_A_10_2016

Содержание SFGLD360



























































































































































































































































































































Результаты поиска

Содержание SFGLD360

Отзывы:

Похожие инструкции для SFGLD360

Бренды по названию

Популярные бренды

Kohler SFGLD360, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SFGLD360

Отзывы:

Похожие инструкции для SFGLD360

Бренды по названию

Популярные бренды