Keithley 2110, Справочное руководство

Страница: 36 / 221

Model 2110 5½ Digit Multimeter Reference Manual Section 2: General overview
2110-901-01 Rev. C/August 2013 2-17
Keys, menus, and selection Description
CONFIG (MENU) Press CONFIG (MENU) to select the menu.
SET ADC Select to configure autozero. Refer to Autozero (on page 3-38) for
details.
AUTO ZERO Selects the autozero operation. Refer to Autozero (on page 3-38) for
details.
ON Turns the function or operation on.
OFF Turn the function off.
TRIG SYS
Access trigger system settings. Use ► and ◄ keys to display
additional selections.
READ HOLD Set the sensitivity band of the reading hold function. If set, it will hold
the stable reading and trigger a beeping sound. Refer to
Reading
hold (on page 3-35) for details.
STORE RDGS Set number of readings to be stored.
DELAY Access delay time settings for the trigger. Refer to Trigger delay (on
page 3-34) for details.
AUTO Select auto delay time for the trigger. AUTO is the default. After
selecting AUTO, the menu structure will close.
MANUAL Select manual delay time, and then select the delay time.
SAMPLE CNT Select number of samples per trigger.
TRIG CNT
Select number of triggers.
SYSTEM
Access system settings. Use ► and ◄ keys to display additional
selections.
SCPI ERR
Check the error queue. Refer to Error codes (on page 6-3) for
information about error queue.
INIT MODE
Check the initial mode settings. Refer to Selecting the initial
operating mode (on page 2-23) for details.
DEFAULT SET Recall the factory settings. Refer to Power-on settings (on page 1-6)
for details.
SAVE DATA Save the current settings as the power-on state. Only the primary
and secondary measurement function, range, resolution, and math
functions are saved. Refer to
Selecting the initial operating mode
(on page 2-23) for details.
SYSTEM VERSION Display system version. Refer to Viewing system version (on page
2-24) for details.
INSTRUMENT INFO Display instrument manufacturer and model number.
SERIAL Display instrument serial number.
DISPLAY Access display settings. Refer to Turning off measurement display
(on page 2-21) for details.
ON Turn display on.
OFF Turn display off.
BEEP Access beeper settings. Refer to Turning the beeper off or on (on
page 2-22) for details.
ON Turn beeper on.
OFF Turn beeper off.
SELF TEST Perform a self-test and display results. Refer to Running a self-test
(on page 6-2) for details.
LANGUAGE Access remote command language settings. Refer to Selecting the
language (on page 2-23) for details.
DEFAULT Set default language. The default language is: Model 2110 SCPI.
COMPATIBLE Set to SCPI-compliant DMM language mode.