99 from 176
14.2
Automatic channel search
After calling up the menu you will see the following on-screen display:
Fig.: Mainmenu - Channel Search, Autom. Search.
The
buttons allow you to select different sets of parameters for the search.
Satellite and Position
Use the
buttons to choose between the individual satellites you have set up, or select
the setting "All". If "All Satellites" is selected, all the individual satellites you have set up will be
searched for new channels. Make sure your reception system is aligned to this/these satellite(s).
Channel Search Mode
Use the
buttons to select the type of channels you want to search for. You have three
options:
►
"free and scrambled"
All channels are searched for
►
"only free"
Only free-to-air channels are searched for
►
"only scrambled"
Only encrypted channels are searched for
To view encrypted channels you need an appropriate CI (Common
Interface) module and a valid Smartcard together with a valid
subscription to the relevant Pay TV provider.
NIT search (network search)
Use the
buttons (On/Off) to select whether a network scan should be performed. If you
set the network search to "Off", only the factory default transponders for the satellite(s) you
previously selected will be searched to look for any new and as yet unsaved channels. If you set
the network scan to "On", the transponder network enables additional transponders that have
not yet been stored to be located. These are then stored and searched for new channels in the
same way as the existing transponders.
