102 from 176
Symbol Rate
Use the numeric keypad to enter the corresponding symbol rate.
13
Mainmenu - Channel Search
Channel Search Mode
Use the
buttons to select the type of channels you want to search for. You have three
options:
►
"free and scrambled"
All channels are searched for
►
"only free"
Only free-to-air channels are searched for
►
"only scrambled"
Only encrypted channels are searched for
To view encrypted channels you need an appropriate CI (Common
Interface) module and a valid Smartcard together with a valid
subscription to the relevant Pay TV provider.
NIT search (network search)
Use the
buttons (On/Off) to select whether a network scan should be performed. If you
set the network search to "Off", only the factory default transponders for the satellite(s) you
previously selected will be searched to look for any new and as yet unsaved channels. If you set
the network scan to "On", the transponder network enables additional transponders that have
not yet been stored to be located. These are then stored and searched for new channels in the
same way as the existing transponders.
Once you have defi ned all the settings, use the
buttons to switch to the "Start Search"
selection fi eld and confi rm the start of the search using the
button.
The following items that are shown on the screen during and in connection with the search are
identical to those of the automatic search (see "This area is the same for all types of search"
on page 100).
