95 from 176
You can tell for which channels
support is activated (on) by the
blue and red tvtv logo. Channels
for which support is not activated
are recognisable by the logo being
greyed out.
tvtv data
support on
tvtv data
support off
If several channels use the same tvtv data, the following warning message
is displayed when you deactivate the function:
"The tvtv data is used for several channels".
In this case, no tvtv data is stored for the other affected channels.
For example: If you deactivate support for RTL 2 CH, no more data is
loaded for RTL 2 and RTL 2 Austria either.
Defi ne this setting for your desired channels. For better orientation, you can display a channel
list in the category "Complete list/Satellite lists" (green), which includes only those channels
supported by tvtv EPG.
The selection of the tvtv list in the category "Satellite Lists" is performed using the
buttons.
This setting can be changed at any time you like.
Use the
buttons to select "Start Blockselection". Confi rm with
. You can now use
the
buttons to start block selection in the previously selected channel. This selects the
recordings in the sequence in which they appear in the previously selected sort list and applies
a coloured background to them.
13.5.7
Start Blockselection
Fig.: Mainmenu - Edit channel list, Blockselection
Now press the
button. You can now carry out all the editing functions channel by channel
individually for all the selected channels. Select the desired action ("Move", "Delete", "Skip",
"Lock" or "To fav. list"), using the
buttons, and confi rm by pressing the
button.
