134 from 176
17.2.1
Multidecryption
16
Mainmenu - Interface Setup
If your CI module is capable of decrypting multiple channels, you can press the
buttons
to select whether the module should always decrypt only one channel (Off) or multiple channels
simultaneously (On). This function is optimised for "AlphaCrypt" modules and may lead to
malfunctions with other modules.
If you select "Off", then you cannot view another encrypted channel through the same
CI module and the currently selected transponder at the same time as making an unencrypted
recording of an encrypted channel.
If you select "On", when recording an encrypted channel you can at the same time view any
other encrypted channel through the same CA module and the currently selected transponder.
The number of other encrypted channels that you can view depends on the CI module you are
using.
17.2.2
Autom. decryption in standby
Here you can choose between the settings "On" and "Off". If it is set
to "On", programmes recorded with encryption will be automatically
decrypted by the receiver in standby mode. For this, it is essential that
the CI module with a Smartcard is located in the common interface of
the receiver. Manual selection for decryption in standby via the recording
archive (My recordings) is then not required.
17.3
HDD Management
Fig.: Mainmenu - Interface Setup, HDD Management
You have the following selection options:
►
Format Record Archive (delete) *
)
►
Format Media Archive (delete) *
)
►
Set up the archive hard disk
*
)
You can only use the fi rst two functions if an archive hard disk has already been set up.
