W
W
W
W
W i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
DN1237-0003 © 1997-2000 Kantech Systems Inc.
7 6
7 6
7 6
7 6
7 6
BC-301 Bar Code Reader
Fully waterproof, its tough cast aluminium shell is treated with black
polymer coating for extra durability. Reads most common bar code
formats, including :Code 39, Interleaved 2 of 5, UPC/EAN, Codebar.
Bi-color LED. Use this reader with your EntraPass to read just about any
existing bar codes cards supplied by the end user.
BC-301
T-REX Exit Detector
First of Kind ! The T-REX creates a new standard and provides a complete solution
to exit detection and door surveillance for access control applications. Outstanding
innovations such as X-Y Targeting
TM
and DSP implement to make the T-REX the
fastest and most reliable exit detector on the market.
X-Y Targeting
TM
targets a specific
area of detection.
While some exit detectors on the market offer adjustments of detection pattern
with masking or horizontal alignment, the T-Rex is the first detector to offer
vertical detection targeting using two adjustable louvers located in the detection
chamber. The installer can “trim” the detection area by adjusting these louvers
from 90º down to a minute 5º. Horizontal adjustment is provided by rotation of
the lens. Added security: These two adjustments allow the installer to mount the
detector in a way that the detector will not “hit” the floor along the doorjamb. This
new and exclusive feature prevents attempts to circumvent the door supervision
by sliding objects underneath the door that would otherwise be detected by
sensors mounted in the traditional way.
DSP prevents false alarms and broken noses !
Kantech’s T-Rex utilizes infrared detection coupled with DSP (Digital Signal Processing) sampling specifically designed
for access control applications. There is a substantial operation difference between a common infrared intrusion motion
detector and the T-Rex. An intrusion detector operates at low sensitivity levels and is looking for the positive presence
of a human. An exit detector must detect an extremely fast movement of a hand (the target) about to push the door or
turn the door handle. Contrary to intrusion applications, a failure to detect in an exit application will actually cause a false
alarm or worse a broken nose !
T-REX
PB-EXIT Exit Button
The PB-EXIT exit button is a spring loaded, momentary square exit button mounted on a stainless
steel plate. The SPDT contacts switch when the button is depressed and returns when released.
The contacts are UL listed with a 10AMP capacity. This button could be used for momentary
release of fail-safe or fail-secure electric locks. It may also be used to input an exit signal to the
access control system. In some areas, local building or fire safety regulations may limit the use of
exit buttons and it is recommended to consult or get approval prior to installing exit buttons.
PB-EXIT
Wireless Transmitters
Extra long read range of up to 25 meters or more
The WLS series transmitters and outdoor receiver provide extra long
read range using wireless technology in the 304MHz range. Ideal for
parking and garage entrance applications. The read range can be extended
by installing the power antenna remotely.
• Available in KSF (Kantech Secure Format) and Wiegand 26 bit format,
• Typical read range of up to 25 meters (80 feet),
• Receiver powered directly from the controller.
WLS-5401
WLS-3700
WLS-3710
