W
W
W
W
W i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
DN1237-0003 © 1997-2000 Kantech Systems Inc.
7 4
7 4
7 4
7 4
7 4
SHV-60E Vehicle Reader
The ShadowProx VID system provides automatic identification of cars, trucks, buses, fork lifts or other
vehicles approaching a gate or controlled roadway. Upon reading the vehicle’s tag, the system will either
activate the gate, overhead door mechanism or deny access depending on the vehicle’s access level. The
system provides managers with new abilities for recording and tracking the flow of vehicles, crates,
containers, etc. in and out of access areas.
Operation
Each vehicle is equipped with a rugged SH-V159 vehicle tag. The
tag can be read at speeds up to 40 km (25mph). When the vehicle
proceeds over the buried antenna, the tag’s unique identification
is transmitted to the access control system. For higher security
application, adding an additional ShadowProx reader for the
driver’s own card would record both vehicle and driver ID before
opening the gate.
Two types of installations
The tag can be installed under the vehicle for detection by a buried cable antenna or, on the side of the
vehicle, to work with a standard SH-X5 reader mounted on a wall or post. For practical reasons, there is
a choice to be made of either undercarriage or side mounted tags.
Buried antenna
Typically, a cable totalling 53 meters (175 feet), including leading length of 7.6m (25’) to connect to the
SH-V60E is buried in loops under the road surface over an area of 1.8m (6 feet) by 46cm (18”). The
cable is wired to the SH-V60E reader electronics housing located in a dry heated environment. The SH-
V60E can be located at a maximum distance of 30m (100’) from the buried loop. From there the SH-V60E
is wired to the KT-300 using regular reader cable. The tags can be read at a distance of up to 81cm (32”)
from the road.
Side mounted reader
A SH-X5 extended range reader is installed against a wall or on a post located as close as possible to the
vehicle’s side where the tags will be mounted. Because the SH-V159 is an active tag, the read range can
be up to 2.4 meters (8 feet). The reader is wired to the KT-300 controller in the usual way.
The SH-X1, SH-X2 & SH-X4 proximity readers are the next generation of the
popular ShadowProx™ line of proximity readers, cards, and tags. Sleek and
contemporary styling allows for installation in the most prestigious locations.
Following the practical tradition of the ShadowProx™ line, these units are
mountable on door mullions (SH-X1), on walls, on single gang electrical
boxes (SH-X2) or on a single or double gang electrical box, as well as any flat
surface (SH-X4). For added style and convenience, they are more compact and will enhance
both the interior and exterior decor of any professional environment.
Single Piece Construction Proximity Reader
, the SH-2KP proximity
reader is designed in format and finishing suitable for installation in the most
prestigious locations. The single piece construction also provides for faster
installation and more reliability.
SH-X2
SH-2KP
SH-X1
SH-X4
ShadowProx Readers
