No.
Item
Reference picture/drawing
Procedure
2-16
9
!
Sub-deck assembly
<Removal>
1) Remove the 5 screws (S2) and pull out the assem-
bly.
<Attaching>
1) While sliding the control plate toward the left, at-
tach the sub-deck assembly.
Fig. 2-7-9
NOTE
⋅
Attach by aligning the phase holes of the
main deck assembly and control plate.
2) Clamp with 5 screws (S2).
10
@
Main brake (SUP) assembly,
#
Main brake (TU) assembly,
6
Sub-brake assembly
<Removal>
Main brake (SUP) (TU) assembly
1) Remove the spring by disengaging its ends from
the hooks (L10) and (L11).
Sub-brake assembly
1) Remove the washer (W1).
2) Remove the spring by disengaging it from the hook
(L8).
<Attaching>
1) Reverse the removal procedure.
Fig. 2-7-10
13
12
11
(L10)
(L11)
(L8)
(P4)
(P5)
(W1)
6
(P1)
11
18
(S2)
15
(S2)
16
(S2)
17
(S2)
(L11)
The boss should
fit into the hole.
Phase alignment
Control plate
35
(S2)