![background image](http://html.mh-extra.com/html/sanyo/vpc-hd1a/vpc-hd1a_service-manual_359491001.webp)
SERVICE MANUAL
Contents
1. OUTLINE OF CIRCUIT DESCRIPTION ............................... 3
2. DISASSEMBLY ................................................................... 12
3. ELECTRICAL ADJUSTMENT ............................................. 17
4. USB STORAGE INFORMATION REGISTRATION ............ 22
5. TROUBLESHOOTING GUIDE ............................................ 23
6. PARTS LIST ........................................................................ 24
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS ........... C1
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part
designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
CAUTION : Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
SX819/U, EX (R)
REFERENCE No. SM5310681
FILE NO.
PRODUCT SAFETY NOTICE
Digital Movie Camera
VPC-HD1A
(Product Code : 168 070 01)
(U.S.A.)
(Canada)
(Korea)
(Taiwan)
(General)
VPC-HD1AEX
(Product Code : 168 070 02)
(Europe)
(U.K.)
(South America)
(China)
(Australia)
(Hong Kong)
(Russia)
(Middle East)
(Africa)
(Korea)
(Taiwan)
(General)
RoHS
•
This product does not contain any hazardous substances prohibited by the RoHS Directive.
WARNING
•
You are requested to use RoHS compliant parts for maintenance or repair.
•
You are requested to use lead-free solder.
(This product has been manufactured using lead-free solder. Be sure to follow the warning given on page 2 when
carrying out repair work.)