1-7
Fig. 1.4.5(3)
(5) Remove the handle cover R and handle cover T.
Fig. 1.4.5(4)
Fig. 1.4.5(5)
Note :
When connecting the LED connector on EAR board, en-
sure the polarity that the red wire should be connected
longer pin of LED.
Fig. 1.4.5(2)
(4) Remove three screws
!
.
0
CN12
CN48
!
Longer Pin
Red wire
Fig. 1.4.5(6)
Note :
When removing the Heat Sink Ass’y, bend the Heat Pipe
slightly like Fig. 1.4.5(6).
Return the bend after attaching the Heat Sink Ass’y.
Do not bend the other portion of Heat Pipe.
About
20 degrees
Do not bend
(3) Remove the cables CN12 and CN48. Remove the two screws
0
and lift up the handle assembly.