No.
Item
Reference picture/drawing
Procedure
2-14
(W2)
14
(S3)
(P2)
(L9)
(P3)
7
8
8
7
Band arm plate assembly,
8
Tension arm assembly
<Removal>
1) Remove the washer (W2).
2) Remove the screw (S3).
3) Remove the spring (P2).
4) Remove the band arm plate assembly and tension
arm assembly.
Fig. 2-7-8(a)
Fig. 2-7-8(b)
6) After attaching, adjust the tension.
Fig. 2-7-8(c)
<Attaching>
1) Attach the spring (P3) to the tension arm assem-
bly. Engage the longer end of spring to hook a
and the shorter end to hook b as shown in Fig. 2-
7-8(b).
2) Attach the tension arm sub-assembly.
3) Attach the band arm plate assembly.
4) Clamp with the screw (S3) and washer (W2).
5) Attach the spring (P2) to (L9).
NOTE
Be careful not to lose the spring (P3).
NOTE
After attaching, ensure that the band arm assem-
bly can rotate in the direction of the arrow as
shown in Fig. 2-7-8(c).
Attach so that the section
Å
comes on the outer
side of the tension arm assembly
8
.
Attaching the spring
Step 1
Step 2
Hook (Longer end)
Hook (Shorter end)
Step 3
b
a
Å
The spring (P3) should be at-
tached only to the tension
arm assembly
8
. It should
not contact the band arm
plate assembly
7
.
