JVC GY-HD100E, Руководство по обслуживанию

Страница: 17 / 78

1-12
䡵
BATTERY INFO Display
Display method
Move the cursor to the “BATTERY INFO..” in “VTR3” screen
and press SHUTTER dial. BATTERY INFO screen (right fig-
ure) will be displayed.
Fig.1-5-8 (2) BATTERY INFO
(When the Anton/Bauer Smart Battery is detected)
– – – B A T T E R Y I N F O – – –
T Y P E A N T O N S M A R T
R E M A I N 1 2 5 M i n / 9 5 %
< 1 2 . 8 V 1 . 2 5 A 3 0
°
C >
F U L L C A P A C I T Y 3 2 . 6 A h
P R E S E N T C A P A C I T Y 3 0 . 5 A h
S E R I A L N O . 5 5 5 2 0
M A N U F A C T U R E 2 0 0 4 / 0 4
S O F T W A R E R E V . 1 2 . 5
C A L I B R A T I O N R E Q U I R E D O F F
P A G E B A C K
1.5.8 VTR 3 menu
In a service menu, place the cursor on “VTR 3” and push the
SHUTTER dial to display the VTR 3 menu.
Fig. 1-5-8 (1)
Changing of setting is prohibited.
– – – V T R 3 – – –
R E S E R V D 0
B A T T E L Y I N F O . .
P A G
B A C K
0 Normal setting
Refer to next page.
Item Parameter
RESERVED
BATTERY INFO
( indicates the factory setting.)
Table 1-5-8 (1)
1.5.7 VTR 2 menu
In a service menu, place the cursor on “VTR 2” and push the
SHUTTER dial to display the VTR 2 menu.
– – – V T R 2 – – –
L O N G P A U S E O N
B A T T . S H U T D OWN 6 . 0 V
B A T Y . A L A RM 6 . 9 V
A N T O N S H U T D OWN 1 2 . 6 V
A N T O N A L A RM 1 3 . 5 V
D F M A S K [ D V ] O F F
P A G E B A C K
Fig. 1-5-7
Operation ways are almost same as CAMERA 1 MENU, so
please refer it.
Item Parameter
LONG PAUSE
BATT.
SHUTDOWN
*
1
BATT.
ALARM
* 1
ANTON SHUT
DOWN
ANTON
ALARM
DV DF MASK * 2
( indicates the factory setting.)
OFF Disable the long pause function.
ON Enable the long pause function.
6.8V Setting of the battery voltage when
shutdown should occur. (Setting in
0.1V steps between 6.3V and 7.5V.)
6.9V Setting of the battery voltage when
battery alarm is indicated. (Setting in
0.1 V steps between 6.3V and 8.0V.)
12.0V Setting of the ANTON battery voltage
when shutdown should occur. (Setting
in 0.1V steps between 10.5V and
13.6V.)
13.5V Setting of the ANTON battery voltage
when battery alarm is indicated.
(Setting in 0.1 V steps between 10.5V
and 13.6V.)
OFF "1" is recorded as per format.
ON "0" is always recorded.
*1 : When operating by DC input, then “SHUT DOWN” will be
set to 6.0V, and “ALARM” will be set to 6.9V automati-
cally, and these setting will not relate to menu setting.
*2 : FRAME RATE 50/25 only
Table 1-5-7